In recent years, the sliding pipe support has gone through professional production practice and scientific operation. The skeleton material based on carbon steel and the cooling material PIR are the main raw materials for the production of this kind of support system, whose quality and performance have been guaranteed and recognized.

Sliding Pipe Support DN80 ( 3 inch) *100 has below technical parameters:

1.Pipe diameter: 89mm

2.cooling thickness: 100mm

3.Bottom floor width(W):150mm

4.Iron piece length(L):150mm

5.ear plate width(E):50mm

6.Pipe bottom elevation(H):80mm

Sliding Pipe Support DN80 ( 3 inch) *100 uses high density (HDPIR) as the cold insulation block. HDPIR is a kind of foaming polymer, with the features of plastic, rubber and cork. The raw materials are isocyanate, polyether, foaming agent, catalyst, flame retardant, etc. After high speed stirring, materials react and foam to cellular structure product, composed of millions of tiny and uniform sealed cells. It provide benefits of low density, low thermal conductivity, low water absorption. The performance is better than timber.

The HDPIR that used in Sliding Pipe Support DN80 ( 3 inch) *100 has such technical parameters:

1.Avg. Density: 160 kg/m3

2.Thermal Conductivity ( 20℃ ): ≤0.032W/m.K

3.Compressive Strength( normal temperature ): ≥2.0 MPa

4.Water Absorption: ≤2.0%

5.Closed Cell Content: >95%.

6.Linear Expansion Coefficient (-l65- 20℃ ): ≤65 x 10^-6 1/K

7.Application Temperature: -306℃

The structure is showed in below picture.

Founded in 2012, the Kaff Rees’ factory is a fast growing manufacturer specialized in providing insulation solutions andinsulationsystems. After persistent efforts the Kaff Rees’ factory has been the national leading specialist in insulation systems. In order to expand the international business, Kaff Rees was founded that committed to provide the products and services of industrial insulation, insulation of civil building , anti-corrosion insulation engineering to the world.

With the factory root in China, Kaff Rees’ efficient design and production makes it possible to produce insulation materials（such as foam glass,Poly Isocyanurate Foam PIR, etc.）, pipe supports close to serial production, not only the standardized products but also the differentiated customization products. Many products are therefore available with the short delivery times possible directly from the Kaff Rees’ factory.

Kaff Rees can provide the professional insulation solutions from -196℃ to +400℃ that engaging in the R&D, production and distribution of insulation materials and pipe supports system.A complete product portfolio covers all support situations, operational loads, temperatures and travel ranges normally experienced in industrial insulationsystems in the construction fields of petrochemical, coal chemical, LNG, low temperature, cold air, subway, underground moisture, cold, heat insulation, etc. Kaff Rees’ systematic design and product solutions provide the corresponding basis.

To meet unusual customer requirements, the Kaff Rees team will arrange specialists for continuous tracking who advise our customers and work together with them to develop solutions.